Full Product Manual

DOOR HANDLE INSTALLATION

TOOLS REQUIRED

1x 2.5mm Allen key

6 x screw caps

DOOR HANDLE INSTALLATION

TOOLS REQUIRED

1x 2.5mm Allen key - (fridge handle)

4 x screw caps

ighten using the provided 2.5mm (smaller) Allen

DOOR HANDLE INSTALLATION

TOOLS REQUIRED

1x 2.5mm Allen key - (fridge handle)

4 x screw caps

ighten using the provided 2.5mm (smaller) Allen

1) Twist on supplied threaded caps (x2) on to existing screws on the fridge door. To ensure no

gap between the handle and the door, make sure that they meet the washer. (Fig. 1 & Fig. 2)

2) Place provided fridge handle on to the screw caps on fridge door (Fig. 3) making sure that the

smaller holes on the handle face the inner edge of the door, and that the screw goes into the

center hole at each end of the handle. Tighten the screws using the provided 2.5 mm Allen key

(Fig. 4)

Fig. 1

Fig. 3

Fig. 4

Fig. 4 Fig. 5 Fig. 6 (as seen from below)

FRIDGE DOOR HANDLE INSTALLATION

Fig. 2

1) Twist on supplied threaded caps (x2) on to existing screws

on the fridge door. To ensure no gap between the handle

and the door, make sure that they meet the washer.

(Fig. 4

)

2) Place provided fridge handle on to the screw caps on

fridge door (Fig. 5) making sure that the smaller holes on

the handle face downwards, and that the screw goes up

into the center hole at each end of the handle. Tighten the

screws using the provided 2.5 mm Allen key (Fig. 6)

FRIDGE DOOR HANDLE INSTALLATION

CAUTION

Do not over tighten the screws, doing so could damage the freezer door.

Handles in place