Use and Care Manual
14
INSTALLATION INSTRUCTIONS
Be sure appliance is properly installed and grounded by a qualifi ed technician.
It is the responsibility of the technician to make certain that your range is properly
installed. Situations caused by improper installation are not covered under the
warranty. Any expenses incurred due to such situations will not be paid by the
manufacturer of the appliance.
If this range is removed for any reason, (eg. service
or cleaning), it must be replaced as outlined before
placing the range back in operation.
Levelling a Free-Standing Range
All free-standing ranges must be level to obtain
proper cooking results. The leveling legs should
be screwed into the corner brackets. Place pan or
measuring cup partially lled with water or a level
on the oven rack. Adjust the leveling legs until the
range is level. The top of the side panels should be
level with the counter top.
WARNING
A child or adult can tip the
range and be killed. Install the anti-tip device
to the structure and/or the range. Verify the
anti-tip device has been properly installed and
engaged. Engage the range to the anti-tip device
by ensuring the anti-tip device is re-engaged
when the range is moved. Re-engage the anti-
tip device if the range is moved. Do not operate
the range without the anti-tip device in place and
engaged. See installation instructions for details.
Failure to do so can result in death or serious
burns to children or adults.
Making sure the anti-tip bracket is installed:
• Slide range forward.
• Look for the anti-tip bracket securely attached to oor.
• Slide range back so rear range foot is under anti-tip bracket.
X2
Range Foot Anti-tip Bracket










