Specifications

Appendix
86
List of error messages
This error is printed if [Print Every Format] is selected when the [Print Every] setting is OFF.
⇒ Check the set value of [06: Print Every ON/OFF] (page 26).
This error is printed if [Batch Total] is turned ON when the [Print Every Format] setting is "Double
print", "Double with count" or "Double with code".
⇒ Check the set value of [07: Print Every Format] (page 27).
This error is printed if "Double print" or "Double with count" is selected under [Print Every Format]
when the [Batch Total] setting is ON
⇒ Check the set value of [20: Batch Total ON/OFF] (page 39).
This error is printed if a code selection table is selected when the [Code Selection] setting is not 2 or 3.
⇒ Check the set value of [22: Code Selection] (page 40).
This error is printed if a value not included in the setting items is input.
This error is printed if the set value is out of the input range.
Error1
Error2
Error3
Error4
Error5
Error