Specifications
6. Advanced use
64
2. Since a list of items in the maintenance mode is printed, select a target
item.
Cautions in maintenance mode
In the maintenance mode, each operation starts as soon as selection is made from the above
menu ([item No.] → [ENT]). A confirmation message as in the setting mode and in the
option setting mode are not printed.
The test mode is an item for a factory check. Do not use this mode. (It is password-locked.)
--------------------------
Cancel/End -->ESC
Test Mode -->5-ENT
Parameter List -->4-ENT
Self Test -->3-ENT
Sample Print -->2-ENT
Test Print -->1-ENT
--------------------------
--------------------------
Maintenance
==========================
operating
To perform a test printing:
To perform a sample printing:
To perform a self test:
Since the item No. of Test Print is [1], press [1] →
[ENT]. As soon as [ENT] is pressed, a test
printing starts.
To print a parameter list:
To enter the test mode:
To cancel or end the maintenance mode:
[1]→ [ENT]
[2]→ [ENT]
[3]→ [ENT]
[4]→ [ENT]
[ESC]