Specifications

4. For greater use of the printer
21
Basic operation of settings
The basic operating procedures for actually making settings of the M252A are described below. Here,
the "Automatic Print ON/OFF" setting is made as an example.
1. Press [F] → [ENT], and the following is printed.
To enter the setting mode, press [1] → [ENT] successively.
2. Upon entry of the setting mode, the following is printed. Since the Date/
Time setting comes up when you enter the setting mode, move to the
desired item.
※ For details of the option setting mode and maintenance mode,
Cancel/End --> ESC
Maintenance --> 3-ENT
Option Setting --> 2-ENT
Setting --> 1-ENT
==========================
Select
==========================
To enter the setting mode:
To enter the option setting mode:
To cancel or end:
To enter the maintenance mode:
operating
see their respective explanations.
[1] → [ENT]
[2] → [ENT]
[3] → [ENT]
[ESC]
End --> ESC
Next --> Number-ENT
Change-> --> ENT
Now => 2000/06/05 12:00
01:Date/Time
--------------------------
--------------------------
Setting
--------------------------
operating
To make the Date/Time setting:
Since the Automatic Print ON/OFF setting No. is [08],
press [08] or [8] → [ENT].
To make other settings:
To end the setting mode:
[ENT]
[Setting No.] → [ENT]
[ESC]