Specifications

2. Printer preparations

Installing a ribbon cassette

Use the PR350/10 (optional accessories) ribbon cassette.

Two ribbon cassette are attached (One ribbon cassette has already been installed at the time of delivery.) .

1. Push the center (mark) of the push panel with your finger until you hear it

click. The push panel pops out forward. And draw out the push panel.

■Do not open the front cover with the power on when

replacing the ribbon cassette, etc. The printer may start

sudden movement, and you may injure yourself.

■Do not drop foreign objects such as screws inside the

printer. If an object is dropped, immediately turn off the

power, and completely remove the foreign object before

using the printer.

■Do not touch the print head immediately after printing

because the print head is hot.

Note