Specifications

Appendix
89
Interface
Rear terminal block (6-7) SI/F-Ach, (8-9) SI/F-Bch
Option BCD input interface
Connector: DDK-manufactured 57-30500 or equivalent
Option RS-232C interface
Connector: D-Sub 9pin (CN33)
General performance
AC Spec. Power supply
voltage
100V to 240V AC (+10%, -15%)
Power
consumption
On standby: Approx. 2.8VA
During print: 20VA (maximum), Approx. 8VA (average)
Inrush current 15A (5msec): 100V AC max. load condition
(ordinary temperature, at cold-start)
30A (5msec): 200V AC max. load condition
(ordinary temperature, at cold-start)
DC Spec.
(Dependi
ng on the
request
at the
time of
order)
Power supply
voltage
12V to 24V DC ( ± 15%)
(voltage between terminals of the M252A)
Current
consumption
On standby: Approx.150mA rms
During print: 10A peak (maximum)
(Approx. 2msec, Histogram format printed)
Approx.800mA (average)
(Print Every Format printed)
Inrush current 1A peak (maximum) (150msec)
(ordinary temperature, at cold-start)
Working conditions
Temperature: Operating temperature range 0 to +40 ℃
Storage temperature range -20 to +70 ℃
Humidity: 85%RH or less (non-condensing)
Outer dimensions
110W × 110H × 168.4D (mm) (not including projections)
Panel cutting dimensions
92W × 92H (mm)
Weight Approx. 1.4kg