Specifications

POWERCASSETTE FRONT-END

OPERATING MANUAL

3.3 19-Inch Compatible Racks. These racks hold two or three TPCM units.

Rack Model No.: TPCMR1U2 for Two Units

TPCMR1U3 for Three Units

4.0 SAFETY WARNINGS

4.1 These power supplies have hazardous external and internal voltages. They

should be handled, tested and installed only by qualified technical persons

who are trained in the use of power systems and are well aware of the haz-

ards involved.

4.2 The input terminals are at hazardous voltage potentials. Do not touch this

area when power is applied.

4.3 When operating this power supply, the chassis ground terminal must be

connected to safety ground by means of a three-wire AC power line to mini-

mize electrical shock hazard and to ensure low EMI (electromagnetic interfer-

ence).

4.4 The internal voltages are at hazardous potentials. The power supply cover

should not be removed. There are no user-serviceable components in these

units. Removing the cover of the power supply will void the warranty.

5.0 WARRANTY

All products of UNIPOWER Corporation are warranted for two (2) years from date of shipment

against defects in material and workmanship. This warranty does not extend to products which

have been opened, altered or repaired by persons other than persons authorized by the manu-

facturer or to products which become defective due to acts of God, negligence or the failure of

customer to fully follow instructions with respect to installation, application or maintenance. This

warranty is extended directly by the manufacturer to the buyer and is the sole warranty appli-

cable. EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, THE MANUFACTURER MAKES

NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. As the sole and exclusive

remedy under this warranty, the manufacturer, at its option, may repair or replace the non-conform-

ing product or issue credit, provided the manufacturer’s inspection establishes the existence of a

defect. To exercise this remedy, the buyer must contact the manufacturer’s Customer Service

Department to obtain a Return Material Authorization number and shipping instructions. Products

returned without prior authorization will be returned to buyer. All products returned for repair must

be shipped freight prepaid to UNIPOWER. If the buyer fails to fully comply with the foregoing, the

buyer agrees that no other remedy (including, but not limited to, incidental or consequential dam-

ages for lost profits, lost sales, injury to person or property or any other incidental or consequential

losses) shall be available to the buyer.