Installation manual

UNIPOWER
Installation manual PQ Secure
91
Close the service control and reboot the server. When the server restarts check through windows task
manager that the service is running.
Figure 82
When the wizard is completed PQ Schedule starts and is ready to download data from the meters. PQ
Schedule should always be running on the communication computer and never be shut down. Note
that no special settings are needed for Ethernet/IP communication. If the computer is connected to a
network PQ Schedule will automatically use it.
9.9.2 Installing UniLauncher
UniLauncher is a utility application that helps you connecting to your Unipower meters via USB.
When you connect the USB cable UniLauncher will automatically connect with the meter and launch
PQ Online.
Start by closing all running programs. Insert the PQ Secure Installation CD and wait for
the Installation program to open (See Figure 49). Select “UniLauncher” and complete the
installation wizard. Usually there is no need to make any changes so you can simply accept the
recommended settings.
If the installation doesn’t start automatically, click on the Windows Start button and select Run. Use
the Browse button to open the file "UniLauncherSetup.msi" in the \UniLauncher cd folder, and click
on OK.
After installation the icon should be seen in the system tray bottom right on the screen.
You can righ-click on it to access the menu: