Installation manual

UNIPOWER
Installation manual PQ Secure
88
9.9.1.2 Configuring using Windows authentication:
Choose this section or section 9.9.1.1 depending on the intended log in method. Unipower normally
recommends using Windows Authentication (9.9.1.2)
Through the windows start menu open PQSchedule.net. The first time PQ Schedule is started a
configuration wizard will start. If you previously configured PQ Schedule and wish to change the
configuration, the wizard can be accessed under “Tools”/”Configuration Wizard” on the PQSchedule
main window.
Figure 76
Check the Use Windows authentication box and fill the server network address.
Figure 77
Enter the SQL-
server’s name or
ip-adress