Installation manual

UNIPOWER
Installation manual PQ Secure
85
9.9 Installing PQ Schedule
PQ Schedule should be installed in the Communications Computer.
The purpose of PQ Schedule is mainly to automatically download the data from the meters into the
database. After installation PQ Schedule is controlled from PQ Secure and you don’t need direct
access to the communications computer, which, like the server, is often placed in a separate
computer room.
Start by logging in as admin on the communication server that you wish to run PQSchedule from,
close all running programs. Insert the PQ Secure Installation CD and wait for
the Installation program to open (See Figure 49). Select “PQ Schedule” and complete the installation
wizard. Usually there is no need to make any changes so you can simply accept the recommended
settings.
Check that the search path is correct. We recommend:
C:\Program Files\Unipower\PQ Schedule
If the installation doesn’t start automatically, click on the Windows Start button and select Run. Use
the Browse button to open the file "Setup.exe" in PQ Schedule\Disk1, and click on OK.
9.9.1 Configuration of PQ Schedule
PQ Schedule can be installed using either windows authentication or SQL server authentication
If Windows Authentication is intended, please refer to section 9.7
9.9.1.1 Configuring using SQL server authentication:
Choose this section or section 9.9.1.2 depending on the intended log in method. Unipower normally
recommends using Windows Authentication (9.9.1.2)
Through the windows start menu open PQSchedule.net. The first time PQ Schedule is started a
configuration wizard will start. If you previously configured PQ Schedule and wish to change the
configuration, the wizard can be accessed under “Tools”/”Configuration Wizard” on the PQSchedule
main window.
Figure 70