Installation manual

UNIPOWER
Installation manual PQ Secure
8
recommends that you connect the instrument to an external UPS type battery source in order to
prevent power failure disturbances.
Always protect the power supply with a 2A fuse in each conductor (phase and neutral).
1.4 Used products
After use, the product must be disposed of in accordance with the relevant national laws relating to
waste handling. The product contains components, such as lithium batteries, which must be handled
correctly in order to prevent environmental damage. Contact your local authority for advice.
2 UNDERTAKING AND WARRANTY
Unipower undertakes to comply with the following legislation and recommendations relating to
marketing and product liability.
2.1 Liability
Unipower AB retains the right to make changes to the instrument or in the instrument specification
as described in this manual without notice. Unipower AB encourages customers to obtain the latest
version of all documentation before making a purchase.
In the absence of a written agreement with the other party, Unipower AB does not accept liability in
respect of customers' failure to observe clauses and copyrights of Unipower and its suppliers, and
third-party products of systems or applications. Unipower AB cannot be held liable for
circumstances in which licence agreements expire for systems or applications installed in the
customer's property. In addition, Unipower AB or its suppliers cannot be held liable for direct or
indirect faults that occur when our products are installed or used.
Unipower AB cannot be held liable for material damage or personal injury arising during the use of
our products if such damage/injury has been caused by a failure to observe guidelines and health and
safety rules.
2.2 Warranties
Unipower AB warrants the absence of material or manufacturing faults during the warranty period.
The provided warranty is limited to one year from the date of delivery inclusive. The warranty does
not apply if:
- the product fault is caused by the customer's incorrect handling
- the product has been used beyond the intended area of application
- the product has been opened by the customer or a third party
- the purchaser or a third party has attempted to repair, or made modifications to, the item
In the event of a claim for repair under the warranty, Unipower AB is entitled to choose whether to
repair or replace the product. The purchaser's claim under the warranty must be made in writing to
Unipower AB before the warranty expires. Items must not be returned without Unipower’s prior
written authorisation.
If the purchaser claims that the product is not in accordance with Unipower’s product specification,
full details of the claimed infringement must be submitted. Compensation will not be provided until
the fault has been documented and approved by the manufacturer. Apart from the warranty
obligations above, Unipower AB is not bound by other warranties or obligations unless these have
been agreed between the parties or are imposed by law.