Installation manual

UNIPOWER
Installation manual PQ Secure
66
9 INSTALLING SOFTWARE
All programs that form part of the PQ Secure system, apart from the Microsoft SQL server, can be
found on the supplied installation CD. The PQ Secure system is based on a database that supports a
number of new methods of monitoring and analysis. Unipower personnel normally perform the
installation, but the following description guides you if you want to do it yourself. Conduct the
installation in the order described below.
9.1 Installation procedure
Depending on the architecture of the PQ Secure the different programs should be installed on
different computers. Please see also chapter 3.4 for more detailed information about the parts of the
system.
The recommended installation procedure is:
Step:
Part in the System :
Action:
Section:
1:
Meter installation computer
Install PQ Online
9.5
2:
Server computer
Install MS SQL Server 2008
9.3
3:
-
Install the PQ Secure database
using PQ Secure DB Wizard
9.4
4:
-
Install the PQ Secure application
9.6
5:
-
Install the PQSM Service
9.7
6:
Communications computer
Install the PQ Schedule application
9.9
7:
-
Install the PQ Online application
9.5
8:
Client computer
Install the PQ Secure application
9.6
9:
-
If needed, install PQ Online
9.5
In smaller PQ Secure systems the same computer can be used as the Server, Communication and
Client computer. In this case it is enough to install just one version of each application.
For installation of licenses, please see section 8.