Installation manual

UNIPOWER

Installation manual PQ Secure

8.3 Cascading multiple units

Several UP-2210 units can be synchronized using a single GPS antenna. To achieve this, a link cable

is connected between the Computer port (COM 0) on the unit where the GPS adapter is connected

and the Display Port on the next unit. From this second unit, another link cable can be connected to a

third unit, and so on. See Figure 47 below.

Note: For the cascade operation to work it is especially important that the grounding of the

meters is properly done. Grounding is done by the ground pin in the meter power supply

connector.

Figure 47 Cascading multiple units