Installation manual

UNIPOWER
Installation manual PQ Secure
37
6 DISPLAY UNIT
There is an optional display unit that can be connected to the UP-2210 and UP-2210R meters. The
display is controlled by Unipower’s user-friendly and self-explaining Turn&Click
®
interface. By
turning and clicking with the dial you control the menus on the display.
The design is in compliance with IEC 61554 for panel instruments with cut-out dimensions:
Width: 186mm ±0 +1.1mm
Height: 92 mm ±0 +0.8mm
Depth needed is 99 mm plus space for 25 pin DSUB connector at back.