Installation manual

UNIPOWER
Installation manual PQ Secure
15
Unipower recommends that external lightning protection is installed between the phone
line and modem in exposed locations, in order to protect the recorder from damages
caused by lightning.
4.2 Installation diagram
The UP-2210 recorder can be mounted on the door or on the wall of the equipment cabinet. For
mounting dimensions, refer to the drawing below. When mounting the meter, leave enough room at
the side to prevent the contacts getting jammed.
It is important to install the recorder as close as possible to the measured object. When installing the
unit, also bear in mind the type of communication you will be using, for example close to the
window for a GSM modem, near a telephone outlet for an external modem, etc.
Figure 6
Display module connector
clearance 80 mm