Data Sheet

2.3.3 UniPi Neuron Type L

2.4 Device mounting

2.4.1 Mounting / demounting

All products of the Neuron product line are designed for mounting onto 35 mm DIN EN 50022.

Mounting

If no DIN rail holder is attached to the Neuron product it is necessary to attach it first with provided

screws. When attaching the DIN rail holder, the holder must be attached such way that the metal

spring is positioned in the upper side of the device.

Mounting of product onto the DIN rail should be done as follows – attach the product onto the rail from

above. Then by pulling down, squeeze the spring and pull the bottom side of the holder over the rail

edge.