Owner Manual

Step 2
Step 3
2.1) Place Table Top (A, B) with its underside facing skywards onto a clean, soft
surface to avoid any scratch or damage to the product. Then connect them as the
arrows.
2.2) Attach 5 Table Support Bars (C) onto the underside of Table Top (A, B) as
shown in above picture.
3.1) Horizontally, secure 2 Table Support Bars (C) into both side of Center Table
Top (A) and Side Table Top (B) using Bolt (②) and Allen Key (④).
3.2) Vertically, secure 3 remained Table Support Bars (C) into the middle of Center
Table Top (A) and Side Table Top (B) as shown in above picture.
Do not fully tighten Bolts.
2.1
2.2
3.1
3.2
Page 4/6