Installation & Assembly

15.1)Use Power Drill(㉓) Drill two mounting positions on wall at same height, insert
Plastic Dowel(㉑) into the mounting position with a Hammer(㉔)(Not priovided).
13.2)Attach L-shape Metal Sheet(⑱) to plastic Dowel(㉑)using Screw(⑲) with
Screwdriver(㉒ ).
Note: The Metal sheet need to be secured to solid, load bearing surface. Please use a
Stud Finder(not supplied) if needed to locate the Wall Frame.
13.3)Attach L-shape Metal Sheet(⑱) to Top Panel(A)using Screw(⑳) with
Screwdriver(㉒).
Your Bookcase is ready for use.
This Bookcase can only be used on a flat, level surface.
17 OF 18