Instructions

5
Push the Slat Decks down
onto the Wood Dowels
and attach with
Wood Screws (H-19).
H-19
7
6
Push (2) “Wood Dowels (H-11) all
the way into the holes on the bottom
of the Bed Rails on just one end of
the bed. (When the bed is folded,
these dowels will fit into the holes on
the other end of the bed.
Assemble the Slat Decks by
pressing (5) Middle Slats (F-48)
into (2) Slat Caps (F-32).
Then press (2) Bed Slats (F-52)
onto the Slat Caps.
Repeat for the other Slat Deck.
F-52
F-32
F-48
Note:
Be sure that the 4
dowel holes are on
the bottom.