Instructions

Press the Prop Connector (F-44) onto
the Wood Dowels on the Props (F-15).
Attach with Wood Screws (H-19).
Push Wood Dowels (H-11)
all the way into holes on the
edge of the (4) Props (F-15)
and the (4) Bed Rails (F-37).
1
H-8
Be sure that the
Prop Connector
goes below the
Bed Rail.
H-8
F-44
F-15
H-19
3
2
F-37
4
•
First, insert two 3-1/4”
Clevis Pins (H-12) into
each Leg (F-10)
•
Then push one of the
Clevis Pins onto each
of the Bed Rails.
•
Then slide the
Rail Connectors (F-6)
onto the Clevis Pins.
•
Put a Hair Pin (H-5) on
each Clevis Pin.
F-15 PROP
H-12
H-12
Be sure that the curved
side of the Rail
Connector (F-6)
is on the top.
H-11
F-15
Repeat these steps to
make the other Prop
Assembly.
H-5
H-5
F-10
F-6
Repeat these steps to make
the other half of the bed
frame.
Be sure that the
Props are on the
INSIDE of the
Bed Rails.
Attach two of the Bed Rails (F-37)
to the outside of one of the
Prop Assemblies using
2-1/4” Clevis Pins (H-8).
Let the Prop Assembly swing
down so that the Prop Connector
can go below the Bed Rails.
Secure the Clevis Pins
with Hair Pins (H-5).
F-37 BED RAIL