Installation & Assembly (Table)

Page 4 OF 6
Lay down the Table Top (A) with its underside facing skywards onto a clean,
soft surface to avoid any scratch or damage to the product.
2.1) Put the tenon of Table Top (A) into the mortise of Leg Panel (B) and then
using Screw () with Allen Key () to secure these parts as shown in above
picture.
2.2) Repeat the same process with the remained Leg Panel (B).
Do not fully tighten the Screws.
A
B
1
2
Step 2
2.1
2.2
2
1
B
A