Installation & Assembly

Step 8:
Step 7:
Position the Seat Frame (G) to the assemble in step 6 as shown above
7
Step 8:
O
Place the Cushion (O) to the Sun Lounger, then tie the velcro straps around Cushion (O) as
pictured. as shown above
Then EXERT pressure, floorwards onto the Sun Lounger with both hands.
This pressure will help the Sun Lounger reach full alignment at all joints.
In a sequential manner, gradually tighten all Bolts, Screws at all joints until evenly secured.
Inspect the Sun Lounger and make sure all parts are adequately connected.
Your Sun Lounger is ready for use.
This Sun Lounger can only be used on a flat, level surface.Place the Sun Lounger onto a flat,
level surface.
7