Installation & Assembly

Place the Chair on a LEVEL SURFACE.
Gently and carefully sit into the Chair.
This will help to align all Parts and Screws fully.
Test the Chair for wobbles.
If no wobbles are found then proceed to tighten all Screws in a sequential manner.
Do not tighten any Screw fully and then move on towards the next one, this could
cause the frame to warp.
Place Seat Cushion(F), and Back Cushion(G) onto the Chair, then secure the velcro
straps to the Chair as shown above.
Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
Step 5
Locked
6