ASSEMBLY INSTRUCTION PLEASE READ BEFORE ASSEMBLING! Tip #1: Make sure you've taken all the pieces and hardware out of its packaging before discarding the box. Assembly on top of flattened box/ blanket is recommended. Tip #2: Using page 2 and/or page 3 of instruction manual make sure all pieces and hardware are accounted for. Tip #3: Note position of all hole son each panel during assembly.
HARDWARE IDENTIFICATION Glue: For securing please apply to wood 0 A O dole First boors inserting into panel LPC PAGE 3 OF 8
ANTI-TIPPING STRAP INSTRUCTION HARDWARE (INCLUDED) : TOOLS NEEDED ( NOT INCLUDED): [ 3o DRYWALL ANCHOR #8X40 X 1PC DRILL & DRILL BIT @ METAL BRACKETS 12X12X1 X PCS 2 & LIGHT HAMMER DRYWALL SCREW ®5X40 X 1PC e STRAP 197X5X1 X 1PC O FLATHEAD SCREW @4X25 X 1PC Note: Hardware included only compatible with standard drywall. STEP 1 STEP 1.Use a light harem to tap anchor into hole. 1.Find spot on wall 17 below top of item. 2. Anchor should £it snugly. Lf hole is too small, 2.
