Installation and Assembly

Table Of Contents

3/3

SET/3 TABLES STEP-BY-STEP ASSEMBLY:

STEP 1:

Gently put the table panel (A) on the floor and make sure the backside is upwards. Reverse

the metal legs. Tighten 4 screws (E) through the table panel (A) using Allen wrench tool (F). Attach

other metal legs (B) by repeating the above steps. Then set the table upright and ensure all screws

been tightened before use.

the

have

STEP 2:

the metal legs. Tighten 4 screws (E) through the table panel (C) using Allen wrench tool (F). Attach

other metal legs (D) by repeating the above steps. Then set the table upright and ensure all screws

been tightened before use. Assemble the other table in the same way.

Gently put the table panel (C) on the floor and make sure the backside is upwards. Reverse

the

have