Installation & Assembly

The emission of the chemicals listed in Prop 65 in this product has been tested to meet the standard of CARB ATCM.
Shelf Board x 1 Bracket x1 Screws x 3 Anchors x 3
1.
3.2.
x 3
x 3
x 1
T
INSTRUCTION
OOLS REQUIRED
5/16 in. drill bit
Phillips
screwdriver PencilLevelPower drill
While holding the bracket Bagainst the wall,
use a level to ethat the bracket is level. Use
a pencil to mark the bracket holes on the wall.
The bracket screws into the wall and the shelf
slides over completely concealing the bracket.
Please install according to the instruction. We and our affiliates are not responsible for injury or damage
resulting from improper installation or use.
Rustic Pine Floating Shelf Installation