Instruction For Assembly

ManualsBrandsUnion Rustic ManualsShelvingTackett Wall Shelf

INSTRUCTION FOR SAFE OPERATION

FURNITURE PRODUCTION

1. The usage of the furniture production released in circulation has to be

carried out to destination furniture products, specified in marking of the instruction for

assembly, operation and leaving.

2. The furniture production delivered in unassembled form has to gather the

specialist in assembly on equal (leveled on level) surfaces according to the instruction

for the assembly including the completing sheet and the scheme of installation

enclosed by the manufacturer.

3 At operation of furniture production it is necessary to exclude hit of water

and other liquids on elements of the products of furniture adjoining to a floor. At

installation of sinks, sinks and furniture products for kitchens, bathrooms their

waterproofing in places of contact with the surface of the case of furniture has to be

provided.

4. At installation of products of furniture in close proximity to heating and

heating devices of their surface during operation have to be protected from heating.

Temperature of heating of elements of furniture shouldn't exceed +40 0C.

5. In use products it is necessary to clamp periodically weakened bolt and

screw connections.

6. In case of need movements of a product on the apartment before his shift it

is necessary to exempt it from freight completely. In order to avoid breakage of the

available support to make movement, raising products over floor level. It is

recommended to take out drawers and regiments before shift.

7. Removal of dust from a product should be made slightly wet or special dry

towel wipes without use of special cleaners.

8. In order to avoid buckling of details and change of color of a product it is

necessary to avoid installation of furniture on direct sunshine.

9. Furniture is recommended to be operated in rooms at a temperature not

below +2 of 0C and relative humidity of 45-70%.

10. Static vertical loading isn't allowed (especially with application of effort in

one point): on a bottom of boxes – more than 5 kg; on shelves of cases, racks – more

than 10 kg. Normal effort of open doors – up to 5 kg, effort of drawers up to 5 kg. Load

of glass regiments shouldn't exceed 2,5 kg.

11. It is forbidden to put hot objects on all covers and horizontal surfaces of

products.

MANUFACTURER'S GUARANTEE:

Warranty period of operation of a product – 24 months from the date of sale by

shop. In the period of a warranty period the manufacturer guarantees repair of

products or their replacement if the consumer hasn't violated service regulations. The

product conforms to requirements of GOST 16371-93.

Furniture for sitting and lying – 18 months from the date of sale by shop. The

product conforms to requirements of GOST 16371-93, GOST 19917-93.

THANKS FOR PURCHASE

Instruction for assembly

Shelf

250

Summary of content (2 pages)

PAGE 1
INSTRUCTION FOR SAFE OPERATION FURNITURE PRODUCTION MANUFACTURER'S GUARANTEE: Warranty period of operation of a product – 24 months from the date of sale by shop. In the period of a warranty period the manufacturer guarantees repair of products or their replacement if the consumer hasn't violated service regulations. The product conforms to requirements of GOST 16371-93. Furniture for sitting and lying – 18 months from the date of sale by shop.
PAGE 2
Assembly sequence Table 1 – Complete set of details Back board shelf Horizontal board shelf Level Размер, мм 1498х250х16 1498х200х16 1498х62х16 1 2 3 Table 2 – Complete set of accessories О-02 х 5 Р-01 х 1 Q-01 х 2 B15 мм А-01 В-01 picture 1 С-01 B5 мм picture 2 Р-01 О-02 ! THE SHELF IS COLLECTED AND READY FOR OPERATION Ø7х50 C-01 x 5 ! Dowels (A-01) are inserted only after PVA glue has poured in openings.