Owner Manual

STEP 9

STEP 10

1. Attach left back board (9) and right back board (10) to back of cabinet by inserting 25 screws

(G) through holes on left back board (9) and right back board (10) then tighten to back of

cabinet.

Option #1: Securing to Drywall

1. Position cabinet against wall in desired location. Using a pencil, make 2 small marks on wall through holes

on brackets (H). Move cabinet away from wall and screw 2 plastic anchors (J) into wall on pencil marks.

2. Place cabinet against wall, insert 2 screws (K) through holes on metal brackets (H), then tighten to plastic

anchors (J).

Option #2: Securing to Drywall and Wood Stud

1. Position cabinet against wall in desired location. Insert 2 screws (K) through holes on metal brackets (H),

then tighten through drywall and into wood stud.

*Tip: Anchor brackets (H) can be adjusted to correct distance from wall to cabinet as needed. Once adjusted,

be sure to re-tighten brackets inside cabinet for stability.