Assembly Instructions

ManualsBrandsUnion Rustic ManualsOutdoor & Patio FurnitureRound 2 - Person 27.5'' Long Dining Set

Caution: You must read this before you proceed

Caution: This Chair is NOT a TOY

Keep your child/ children at bay during the assembly process.

Whenever moving/lifting the Chair and to prevent damage to the Chair two

adults are needed to execute these actions.

Dining Chair

1 of 7

Summary of content (7 pages)

PAGE 1
Assembly Instructions Caution: You must read this before you proceed Dining Chair Caution: This Chair is NOT a TOY Keep your child/ children at bay during the assembly process. Whenever moving/lifting the Chair and to prevent damage to the Chair two adults are needed to execute these actions.
PAGE 2
Parts List Label Picture Description QTY A Chair Frame 1 B Seat Frame 1 Description Qty ① Screw (M6*20mm) 3 ② Bolt (M6x10mm) 3 ③ Bolt (M6x40mm) 7 ④ Washer (D2mm) 5 ⑤ L-Bracket 2 ⑥ Allen Key 1 Hardware No.
PAGE 3
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Chair Frame (A) Seat Frame (B) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
PAGE 4
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 2.1 2.2 2.1) Align Seat Frame(B) to Chair Frame(A) as pictured. 2.2) Attach Seat Frame(B) to Chair Frame(A) using Bolts(③) with Allen Key(⑥). Do not fully tighten the Bolts.
PAGE 5
Step 3 Attach L-Bracket(⑤) to Seat Frame(B) using Bolts(②) and Washers(④) with Allen Key(⑥). Do not fully tighten the Bolts. Step 4 Attach L-Bracket(⑤) to Chair Frame(A) using Screws(①) and Washers(④) with Allen Key(⑥). Do not fully tighten the Screws.
PAGE 6
Step 5 Place the Chair on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit into to the Chair. This will help to align all the parts at all joint areas. Then get off the Chair and proceed to tighten the Bolts and Screws in a sequential manner. When tightening the Bolts and Screws tighten sequentially. DO NOT tighten any Bolt or Screw fully and then move on towards the next one.
PAGE 7
of 7