getting familiar with the main components *Mini fix is the main connection component used in Decorative products.Before starting, please check the below figures ee + MINI FIX DOWEL Cw, MINNIE 2 4 2 HEAD & SCREW *Please notice that there is an small arrow on AQ2 {minim head). This arrow should show the direction of upper hole. | “After attaching two pieces please tum the A02 | “Please do not over screw the mini fix head since it {mini fix head) clockwise direction with the help of a screwdriver.
step a “Please Insert AQ3 (mini fix screw) into the holes on the piece #7 and #8 as shown below “Please Insert ADZ (mini fix head) into the holes on the pieces #2 #4 and #5 as shown below “Make sure that all the arrows on AD2 (mini fix head) are in correct direction
step b *Please attach the piece #5 between the pieces #7 and #8 as shown below *Now screw the AD2 {mini fix head) clockwise direction with the help of screwdriver. step ¢ *Please attach the pieces #9 and #12 to the piece #6 as shown below *Now screw the A13 (50 mm screw) clockwise direction with the help of screwdriver.
step d “Please attach the parts we installed in step b fo the piece #9 as shown below Now screw the A13 (50 mm screw) clockwise direction with the help of screwdriver. Lt Phase recite fhe prs dried holes they should be on the front side of the tv stand so hat you oan stall the doors, step e *Please attach the piece #4 onto the piece #9 as shown below *Now screw the A13 (50 mm screw) clockwise direction with the help of screwdriver.
step f “Please insert ADS (mini fix screw) into the holes on the piece #1 as shown below *Please insert AD4 (dowel) into the holes on the piece #1 as shown below step g *Please attach the piece #1 onto the top of the furniture as shown below *Now screw the AD2 (mini fix head) clockwise direction with the help of screwdriver.
Half Overlay Hinge inset Hinge Half Overlay Hinge A half overlay hogs is an option you'll want for parse overlay ar half overlay cabinets. Half overlay cabinets have twp doors that weal In the middle and share a slam wall or addition. These hinges attach to the inside of the doors and allow them 10 open near each other without hitting each other These hinges mound to the partition shared by the two doors, Hay need robe small i size 1 allow ham both fo on the partition.
step h “Please nail down ADS (shelf pin) on the holes on the Pisces #244 and #8 with the help of an hammer “Please put all the C04 {pivot ) the way that they will fit the per-drilled holes on the piece 49 Now take ADS (3.
step i *Please pul all COS (half overlay bracelet} into the big holes on pieces #10 and #11 the way they will it the per-drilled holes “Now take ADS (3.
step | “Please put the pieces #3 onto the ADS (shelf pin } as shown below | step *For the best result use all nails given in the hardware pack WwW "Please take the two panels and nail down with the help of a hammer Please do not neglect installing the back panel of the tv stand. installing the back panel will both make your tv stand sturdier and look better.
step n “Please put A31{M4x22 handle screw) info the holes on the pieces #10 and #11 as shown below then attach the KO1 (128 mm handle) Now turn A31{M4x22 handle screw) clockwise direction with the help of screwdriver.
final look step o *For the best appearance of your furniture please place all ADT{18 mm sticker) unto the A13 (50 mm screw) and Minifloppies head).
