ACCENT TABLE 1/10
Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service In order to assist you in a timely manner, please have the following information ready: Model # ____________________Part Number or Letter______________________ Purchased at _________________Date of Purchase _________________________ If you wish to return the product, please contact the retailer where the product was purchased.
IMPORTANT : for Please read this manual carefully before beginning assembly of this product. keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. keep children and pets away during assembly.
IMPORTANT : Keep this manual for future reference. CARE and MAINTENANCE This furniture is designed for indoor use. Damage to furniture can come from temperature changes in relative humidity (RH) in our homes. Humid air oxidizes metal which results in rusting, corrosion, tarnishing and roughness. Wood absorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. To protect against the humidity effect, the metal is powder coated.
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION A B TOP QTY 1 LEG QTY 3 PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 1 2 ALLEN KEY BOLT M6 X 12 mm QTY 09 LOCK WASHER Ø 12 / Ø 8.5 X 2.
COMPONENTS - KEY DIAGRAM A P1 B P2 B P3 B 6/10
ASSEMBLY STEP 1 B A P1 3 2 B P1 B A 1 2 A 1. Align Leg B to Top A by matching the letters P1 to P1. 2. Use Three key Bolts 1 and Three Lock Washers 2 to attach Top A and Leg B. 3. Use Allen Key 3 to tighten Bolts. Do not over - tighten.
ASSEMBLY STEP 2 B P2 A B B 1 3 2 B P2 A A 1. Align Leg B to Top A by matching the letters P2 to P2. 2. Use Three key Bolts 1 and Three Lock Washers 2 to attach Top A and Leg B. 3. Use Allen Key 3 to tighten Bolts. Do not over - tighten.
ASSEMBLY STEP 3 B A P3 B B 1 3 A A 2 P3 1. Align Leg B to Top A by matching the letters P3 to P3. 2. Use Three key Bolts 1 and Three Lock Washers 2 to attach Top A and Leg B. 3. Use Allen Key 3 to tighten Bolts. Do not over - tighten.
WARRANTY Thank you for purchasing our product. These products have been made to demanding, high-qualitystandards and are guaranteed for domestic use against manufacturing faultsfor a period of 12 months from the date of purchase. This warranty does notaffect your statutory rights. We reserve the right to repair or replace the defective product, at its discretion. This product is guaranteed for 12 months if used for normal purposes.
