Owner Manual

STEP 5
1. Slide back board (9) into grooves on left side panel (6), right side panel (7) and top board (1).
2. Insert 8 wood dowels (C) into wood dowel holes on left side panel (6), right side panel (7) and
2 divider boards (8).
3. Attach bottom board (5) to left side panel (6), right side panel (7), back board (9) and 2 divider
boards (8) by inserting wood dowels (C) into wood dowel holes on bottom board (5), make sure
back board (9) aligns with groove on bottom board (5).
4. Insert 4 screws (D) through the holes on bottom board (5) then tighten to left side panel (6) and
right side panel (7).
1. Attach 4 metal legs (11) to bottom board (5) by inserting 8 machine screws (F) through holes
on 8 washers (E), then through holes on metal legs (11), then tighten to bottom board (5).
2. Attach 2 middle support legs (12) to bottom board (5) by inserting 4 machine screws (G)
through holes on middle support legs (12) then tighten to bottom board (5).
STEP 6
C
D
D
D
D
C
C
C
C
C
C
C
5
9
6
F×2
F×2
E×2
E×2
F
F
G
G
G
G
G
G
E
E
E
E
E
E
F
F
F
F
5
11
12
12
11
11
9
6
12
11