ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION ASSEMBLY TIPS: .A. 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. Warning ! 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishment.
<> PARTS IDENTIFICATION: (S) MIDDLE DRAWER BOTTOM PANEL z HARDWARE PACKAGE DESCRIPTION 1PC (U) CROSS BAR 2PCS (T) METAL FRAME NO 1 PC FIGURE QTY NO 0 1PC 8 GLIDES SCREW 1()3x12mm 45PCS 9 KNOB 20PCS 10 KNOB BOLT ¢4x28mm DESCRIPTION 1 GLUE 40g 2 WOODEN DOWEL ¢8x30mm 3 CAM BOLT ¢7x35.5mm 4 CAM LOCK ¢15x12mm 20PCS 11 BOLT M6x20mm 5 SCREW ¢4.5x42mm 16PCS 12 BOLT M6x44mm 6 DRAWER SCREW ¢4.
STEP 1 � [ � @l (I) x 3 � � x4 � � the reverse side the reverse side INCORRECT 0 CORRECT Apply glue on all wooden dowels to ensure integrity of the structure.
STEP 2: Apply glue on all wooden dowels to ensure integrity of the structure. STEP 3: / ,�-� \ ' /G)(l ! \ ' --..______ _ _.-/ ,) Apply glue on all wooden dowels to ensure integrity of the structure.
STEP 4: Apply glue on all wooden dowels to ensure integrity of the structure. (E) STEP 5: Apply glue on all wooden dowels to ensure integrity of the structure.
STEP 6: Apply glue on all wooden dowels to ensure integrity of the structure.
STEP 8: [ ii STEP 9: Apply gl,e oa all woodeo ,�• to ensure integrity of the structure.
STEP 10-1 : STEP 10-2 : co I Apply glue on all wooden dowels to ensure integrity of the structure.
STEP 11-1 : STEP 11-2 : Apply glue on all wooden dowels to ensure integrity of the structure.
STEP 12 FINISH
