Assembly Instructions

Step 3
Step 4
Attach the Wooden pad (D) to the table by using Short Screws (
③
) and Screw driver (
⑦
) as shown in
picture below.
Repeat the same process to attach 3 remaining Wooden pads (D) to the table.
Do not fully tighten the Screws.
Attach Second Leg (C) to Table Top (A) as shown in picture above.
Affix the leg (C) with the block by using Bolts (
①
), Spring Washer (
④
), Flat Washer (
⑤
) and Allen
Key (⑥) as shown in picture above.
Affix the leg (C) with the table top (A) by using Long Screw (②) and Allen Key (⑥) as shown in
picture above.
Repeat the same process to attach the remaining Legs (C) into the Table Top (A).
Do not fully tighten the Bolts/Screws.
A
C
B

k




D
A
C
B



Page 6 of 8