Caution : You must read this before you proceed ROCKING CHAIR CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly.
Label Description QTY A Left Arm with Leg Panel 1 B Right Arm with Leg Panel 1 C Backrest Panel 1 D Seat Panel 1 E Seat Cushion 1 F Back Cushion 1 Description Qty ① Long Screw M6x80mm 5 ② Long Bolts M6x95mm 3 ③ Short Bolts M6x80mm 3 ④ Sleeve Nut M6x15mm 5 ⑤ Short Screw M6x35mm 5 ⑥ Allen Key 2 No.
Before Beginning Assembly: OVERVIEW Back Cushion (F) Backrest Panel (C) Right Leg Panel (B) Seat Cushion(E) Le� Leg Panel (A) Seat Panel (D) FRONT FACING This Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chair, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 2.2 2.1 B A 2.1) Position Seat Panel (D) to Left Leg Panel (A) Then, position Right Leg Panel (B) onto Seat Panel (D) as shown in picture above 2.2) Secure Right Leg Panel (B) to Seat Panel (D) by using Screw (①), and Allen Key ( ⑥), Then Using Screw(⑤) and Allen Key(⑥) to secure Seat Panel (D) with Left Leg (A) Do not fully tighten the Screws.
Step 3 With assistance from your adult partners, turn the Chair into the other side. Repeat the same process of step 2 to secure Left Leg Panel (A) with Seat Panel (D) by using Screw( ①), and Allen Key (⑥), Then using Screw(⑤) and Allen Key(⑥) to secure Seat Panel(D) with Right Leg Panel (B) Do not fully tighten the Screws. Step 4 Turn the Chair right side up.
Step 5 Keep Chaiir Position Backrest Panel (C) to Leg Panels (A & B) as the picture above Secure Leg Panels (A), (B) to Backrest Panel (C) by using Short Bolts (③)& Sleeve Nuts (④) and Allen Key (⑥) Do not fully tighten the Screws. Step 6 Inspect the Chair and make sure all parts are connected. Place Back Cushion (F) and Seat Cushion (E) onto the Chair Tie the velcro straps of Back Cushion (F) to Backrest Panel (C) and Seat Cushion (E) to Seat Panel (D). Your Chair is ready for use.
of 7
