Assembly Instructions

Step 2

2.1) Gently pull theTop Table (A) outwards to open and stop when it could see the

extension board frame support.

2.2) Turn the Expansion Board of Table Top, located inside of the table as shown

above.

Caution: Do not Lean on or apply pressure to the table when it is pulled open. This

could cause damage to the product.

Step 3

Push the Table Top (A) inwards until two wings of Table Top (A) align.

Caution: Keep hands away from the Table Top (A) and Expansion Board of Table

Top (B) when pushing the Table Top (A) to avoid pinching hazards.

If you can not push the Table Top (A) inwards, Just slightly shake the Table Top

(A).

Step 4

Lock the Metal Fastener under the table to lock the Expansion Board of Table Top (B)

into place.

Your Table is extended and is now ready for use.

2.1

2.2