User's Manual

SECTION IV CONFIGURATION & DIAGNOSTICS
SM 7063 07/97 4-19
4.4.13 Allow Changing Between One and Two Way Operation
The CDU has the capability to operate in either one-way or two-way mode. If this configuration item is
set to ON, the CDU will prompt the user to select the operational mode immediately after a new ID
Code has been entered. If the value is set to OFF, the CDU will not prompt the user and will simply
save the new ID Code and operate in two-way mode at all times. To enable or disable this feature,
type in “13” (Allow Changing Between One and Two Way in ID Menu) and press <Enter>. The
following screen shows the currently selected setting:
To change the operational mode, type in the menu item number and press <Enter>. To return to the
Main Configuration Menu, press <Esc>.