User's Manual

SECTION IV CONFIGURATION & DIAGNOSTICS
SM 7063 07/97 4-16
4.4.10 Configure Front Panel Menu
As listed in Table 3.1, each CDU menu function can be enabled or disabled depending on specific
Railway requirements. When a Function Menu Item is disabled, it will NOT appear in the Function
Menu Display when the MENU UP or MENU DOWN key is pressed.
To view the Front Panel Menu items, select item “10” (Configure Front Panel Menu) and press
<Enter>. The following screen listing the menu items will appear:
To enable or disable any of the menu items, type in the submenu item number and press <Enter>.
Each submenu item will show the current enable/disable status. To enable or disable a particular
menu item type in the numeric value for ON or OFF, respectively, and press <Enter>.
Press the <Esc> key to return to the next higher level configuration screen.