User's Manual

SECTION IV CONFIGURATION & DIAGNOSTICS
SM 7063 07/97 4-13
4.4.7.4 Set Parity
The screen below shows the current parity setting.
To change the parity, type in the desired submenu item number and press <Enter>. To return to the
Set Protocol menu, press <Esc>.
4.4.7.5 Set Number of Stop Bits
The screen below shows the current setting of the number of stop bits.
To change the stop bits setting, type in the desired submenu item number and press <Enter>. To
return to the Set Protocol menu, press <Esc>.