User's Manual

SECTION IV CONFIGURATION & DIAGNOSTICS
SM 7063 07/97 4-12
4.4.7.2 Set Baud Rate
The screen below shows the current baud rate setting.
To change the baud rate setting, type in the desired submenu item number and press <Enter>. To
return to the Set Protocol menu, press <Esc>.
4.4.7.3 Set Bits per Character
The screen below shows the current bits per character setting.
To change the number of bits per character, type in the desired submenu item number and press
<Enter>. To return to the Set Protocol menu, press <Esc>.