User's Manual

SECTION IV CONFIGURATION & DIAGNOSTICS
SM 7063 07/97 4-9
4.4.6 Configure Odometer
To configure the odometer related functions for the type of units displayed (English or Metric) or to set
the locomotive wheel diameter, select item “6” (Configure Odometer) and press <Enter>. The
following screen showing the associated submenus will appear:
To select an item from this submenu, type in a menu item number and press <Enter>. To return to the
Main Menu, press <Esc>.
4.4.6.1 Set Type of Units Submenu
The screen below shows the current Unit selection:
The factory default is English units. To select English or Metric Units to be used for display when using
the odometer related functions, type in a menu item number and press <Enter>. To return to the
Configure Odometer Menu, press <Esc>.