User's Manual

SECTION IV CONFIGURATION & DIAGNOSTICS
SM 7063 07/97 4-7
4.4.4 Enable Two-Way Mode
To read the current Mode setting or enable/disable the two-way mode, select item “4” (Enable Two-
Way Mode) from the Main Configuration Menu and press <Enter>. The following screen showing the
current mode will appear:
To default the initial power-up mode to One-Way or Two-Way Mode, type in the number of the desired
mode and press <Enter>. The selected mode will be the one used by the CDU when it is powered ON.
Subsequent changes via the CDU front panel using the “Press SET to change to One-Way” or the
“Press SET to change to Two-Way” functions during the entry of a new ID code will change the
operating mode accordingly in the normal fashion.
To return to the Main Configuration Menu, press <Esc>.