User's Manual

SECTION IV CONFIGURATION & DIAGNOSTICS
SM 7063 07/97 4-6
4.4.3 Set Two-Way Protocol Type
To read the current Two-Way protocol setting or modify the protocol, select item “3” (Set Two-Way
Protocol Type) from the Main Configuration Menu and press <Enter>. The following screen showing
the current protocol will appear:
To modify the protocol, type in the number of the desired protocol and press <Enter>. The selected
protocol will be the one used by the CDU when the user wishes to switch to Two-Way operation as
prompted by the “Press SET to change to Two-Way” function during the entry of a new ID code.
To return to the Main Configuration Menu, press <Esc>.