User's Manual

SECTION IV CONFIGURATION & DIAGNOSTICS
SM 7063 07/97 4-5
4.4.2 Set One-Way Protocol Type
To read the current One-Way protocol setting or modify the protocol, select item “2” (Set One-Way
Protocol Type) from the Main Configuration Menu and press <Enter>. The following screen showing
the current protocol will appear:
To modify the protocol, type in the number of the desired protocol and press <Enter>. The selected
protocol will be the one used by the CDU when the user wishes to switch to One-Way operation as
prompted by the “Press SET to change to One-Way” function during the entry of a new ID code.
To return to the Main Configuration Menu, press <Esc>.