User's Manual

SECTION III OPERATION
SM 7063 07/97 3-33
Note 1
:
Bit State Description
7 N/A Always set to 0.
a EOT Dump Valve Status (ie., End Unit confirmation bit status)
0 Inactive - Confirmation bit not set.
1 Active - Confirmation bit set.
b EOT Type
0 One-Way Rear EOT Unit.
1 Two-Way Rear EOT Unit.
c HVM Light Status
0 HVM Light OFF (ie., not flashing).
1 HVM Light ON (ie., flashing).
d EOT Telemetry Battery Status
0 Battery OK.
1 Battery status is WEAK or REPLACE.
e EOT Message Status
0 Regular 0.5 second message.
1 New message just received from EOT.
f EOT Moving Status
0 EOT is stopped.
1 EOT is moving (including forward and reverse).
g Rear-to-Front Radio Communications
0 R -> F communication is OK.
1 R -> F communication is not OK.