User's Manual

SECTION III OPERATION
SM 7063 07/97 3-4
3.4.4 Function Menu Display
This 32-character alphanumeric display indicates the various menus items selected by pressing the
MENU UP
or
MENU DOWN
function keys. It is also used to display temporary information resulting
from actions performed by the operator.
All of the menu items except “View and Change End Unit ID Code” can be enabled or disabled via
configuration using the Diagnostic PC to accommodate Railway specific needs (these are all detailed
in Section IV).
The table below lists the menu items in the order they are displayed with each press of the
MENU
DOWN
function key when all menu items are enabled.
Menu
Item
Functional Description CDU Function Menu Display Messages PC
Configurable
1 View and Change the End Unit
ID Code
“Change ID: 12345”
“Saving ID ...”
“New ID: 12345”
N
2 View Secondary Pressure
“Secondary Pressure: 095”
Y
3 View and Change the Train
Length
“Train Length: 02400 ft press SET”
“New Train length: 03650 ft”
Y
4 Measure Distance using the
Odometer (count up from zero)
“Odometer: press SET”
“Odometer: 00000 ft”
Y
5 Measure Distance using the
Train Length (count down to
zero)
“TL Distance Countdown: press SET”
“TL Distance = 03650 ft”
Y
6 Calibrate the Odometer using
a Measured Mile
“Measured Mile: press SET”
“Press SET at End of Mile 00000 ft”
“4954 ft, corrected to 5280 ft”
“Measured Mile FAILED”
Y
7 View the Locomotive Wheel
Size
“Wheel Size = 40.00 inches”
Y
8 Change Wheel Size
“Wheel Size: 40.00” press SET”
Y
9 View the Train Acceleration
“Acceleration = 000 mph/min”
Y
10 View the Train Speed
“Speed = 000 mph”
Y
11 “Disarm” from a Specified End
Unit
“Disarm: press SET”
“Press SET to Confirm Disarm”
“Disarming ... ”
“System is NOT ARMED”
Y
12 View and Display All Incoming
End Unit ID Codes
“ID Scan: 12345 54321”
Y
13 Set the Sonalert Output
Volume
“Change loudness: 4 (of 4)”
Y
14 Set the Display Panel /
Annunciator Brightness
“Change brightness: 7 (of 7)”
Y
15 Perform CDU Self Test
“Self Test: press SET”
(Refer to Section 3.8.13)
Y
Table 3-1. Quick Reference: CDU Function Menus and Display Messages