Specifications

VIRDI 6000
TM
Administrator Manual
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: [phone], Fax: [phone],
E-Mail:[e-mail], http://www.unioncomm.co.kr/eng
User not authenticating after registration.
· See section 1.1.7. Correct
fingerprint registration and input
methods
· Ensure the auto sense LED (red
led on sensor window) appears
when the finger is on the sensor
window.
· If using the server, make sure the
authentication method is correct.
See 3.5.1.3. Authentication Mode
· Check user authentication type.
Door Not Opening
· Ensure lock is properly connected
to terminal. See installation
instructions.
· Ensure the Door Option section is
correctly programmed. 3.6.4. Door
Option Settings
· Ensure the GREED LED is on
when the authentication is
successful.
Cannot connect to Server
· Ensure the LEDs near the
Ethernet plug are ON.
· Ensure the network ICON is
shown on the main screen. See
ICON list. If Ethernet LINK is good
the ICON will be white, if
connected to the server the icon
will be animated.
· Ensure the terminal ID is correct in
the server program and the
terminal. 3.5.1.2. Terminal ID
Number
· Ensure the network settings are
correct. 3.3. Network Settings