User guide

VIRDI 4000 User Guide 19
Union Community CO., LTd. 44-3 Hyundai Topics Building 5, 6 floor, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: [phone], Fax: [phone],
E-Mail:[e-mail], http://www.unioncomm.co.kr
3.3. User account
3.3.1. User registration
Press the [1] button in the main menu to select “1.User”, and the following
screen appears:
1. Add
2. Delete
3. Modify
4. Add Admin
5. Delete All
Press [1] to register a new user.
User ID [NEW]
ID : _ _ _ _
Enter a new user ID, and press [ENTER].
If the entered ID is not new, you will hear a “ppibig” sound and it moves to the
upper menu. If not, the following authentication method selection screen
appears:
1.FP 2.ID&PW
3.FP|PW 4.FP&PW
5.RF 6.RF|FP
7.RF&FP 8.RF|PW
91. RF&PW
92. ID&FP | RF&FP
▼
Press [0] to see menus not shown in the LCD
window. Select one from among the 11
registration methods.
3.3.1.1. “1. FP” registration
fingerprint registration and fingerprint authentication
◆ [ENTER]  [1]  [1]  User ID [ENTER]  [1]  1:1 Level [ENTER]
 Enable 1:N [ENTER]  Input FP  Input same FP ◆
<1:1 Level>
( 0-9 ) : 0
Recommended setting: ‘0’
A different authentication level can be assigned to each different user.
If this is set to ‘0’, the identification level set for the terminal is used instead of
the identification level assigned to each user. When the 1:1 verification level of
the terminal is changed, all user identification levels set to ‘0’ are changed.
Press [ENTER] to move to the next setting.