VIRDI 4000 .User Guide Version eng-1.00 Copyright 2007 By Union Community CO., LTd.
VIRDI 4000 User Guide 2 < Glossary> Admin, Administrator - As a user who can enter into the terminal menu mode, he can register/modify/delete terminal users and change the operating environment by changing settings. - If there is no administrator for a terminal, anyone can change the settings, so it is recommended to register at least one administrator.
VIRDI 4000 User Guide Table of Contents < Glossary> ............................................................................................................... 2 Table of Contents ..................................................................................................... 3 1. Before use ............................................................................................................. 5 1.1. Safety precautions ......................................................................
VIRDI 4000 User Guide 4 3.7.1. Terminal lock settings ......................................................................... 42 3.7.2. Read card number .............................................................................. 42 3.8. Device settings .......................................................................................... 43 3.8.1. Function key settings .......................................................................... 43 3.8.2. Card reader settings .......................
VIRDI 4000 User Guide 1. Before use 1.1. Safety precautions Warning Handling with wet hands or allowing liquid to flow into it is not advised. -> It may cause an electric shock or damage. Do not place a fire source near the unit. -> It may cause a fire. Do not disassemble, repair, or modify the unit. -> It may cause an electric shock, fire or damage. Keep out of reach of children. -> It may cause an accident or damage. - If the above warnings are ignored, it may result in death or serious injury.
VIRDI 4000 User Guide 1.2. Terminal description Micro phone LED lamp : Terminal operation state Fingerprint input window : Window for fingerprint input LCD display window : Display character message for all the operations IRED sensor Key pad Enter button Speaker Call button 1.3. Button description start leave outside work Terminal menu setting (enter into menu mode when pressed over 2 sec.
VIRDI 4000 User Guide 1.4.
VIRDI 4000 User Guide == 00:00 - A registered user tried authentication when entry/exit is not allowed. == 00:00 - Waiting for a reply from the server for authentication == 00:00 == 00:00 - Terminal is locked - No meal time even though the unit is set to meal control mode - Terminal program upgrade (Power switch should not be turned off when this message is displayed.) 1.5.
VIRDI 4000 User Guide 9 1.8. Correct fingerprint registration and input methods Correct fingerprint registration methods Place your index finger on the window just as you do with a finger stamp. Finger tip touching is not an appropriate registration or input method. Make sure the center of your finger touches the window. Use your index finger. The index finger guarantees an accurate and stable fingerprint input. Check if your fingerprint is unclear or damaged.
VIRDI 4000 User Guide 10 Cautions about fingerprint condition Depending on the user’s fingerprint condition, some fingerprints may not be used or may cause an inconvenience. If the fingerprint is damaged or very unclear, then it cannot be recognized. Please use a password instead in this case. When a finger is dry, breathe on the finger for smooth operation. For kids, it may be tricky or impossible to use the unit because their fingerprints are too small or very unclear.
VIRDI 4000 User Guide 11 2. Introduction 2.1. Features Access control system using LAN - Communication between the unit and authentication server is done through a UTP cable and TCP/IP protocol, so an existing LAN can be used as it is. It guarantees network-based administration and monitoring as well as easy expansion, high reliability, and higher speed. Convenient Auto Sensing function - Simple authentication process without any key input; simple fingerprint touching is sufficient.
VIRDI 4000 User Guide if the card reader is not installed), so you are required to select one method before registering users and an administrator.
VIRDI 4000 User Guide 2.2. Configuration 2.2.1. Network configuration Network Server (authentication server) UTP UTP UTP Switch Hub LET 36 UTP 6410 Tx Rx 641 2 Tx Rx 1 Tx Rx UTP 1 3 Tx Rx 2 Tx Rx 1 2 4 Tx Rx 1 Tx Rx Tx Rx 1 2 2 1 2 3 6423 1 2 2 1 2 3 643 8 4 5 6 7 3 9 4 10 11 11 12 5 12 6 2 1 641 0 8 2 2 643 7 Tx Rx 2 3 Tx Rx 1 2 4 5 7 6 8 9 10 1 3 4 WAN UTP UTP TCP/IP 2.2.2.
VIRDI 4000 User Guide 2.3. Specifications ITEM SPEC CPU 32Bit RISC CPU REMARK 8M SDRAM MEMORY 4M FLASH (Default) 8M FLASH (Option) Fingerprint sensor Optical Authentication speed <1 sec. Scan Area / Resolution 12.9 * 15.2mm / 500 DPI FRR / FAR 0.1% / 0.
VIRDI 4000 User Guide 3. Environment settings 3.1. Check items before setting the environment 3.1.1. Entering menu The following screen appears when [*] is pressed for over 2 sec. 1. User 2. Network 3. Option 4. Terminal Info 5. Ext Function 6. Device Press [0] to view menus not shown in the LCD window. If a number corresponding to the menu required is pressed (ex.
VIRDI 4000 User Guide 3.1.3. Save environment settings Press the [#] button in the main menu to save environment settings and the following screen appears: Save? [Y=1/N=2]:_ Press [1] to save changes. If not, press [2]. If there are no changes made to the settings, “Save?” does not appear, and the initial screen appears. If there is no input for a certain period of time while setting the environment, the settings process will finish. If there are changes made to the settings, “Save?” appears.
VIRDI 4000 User Guide 3.2. Menu configuration 1. User 1. Add 2. Delete 3. Modify 4. Add Admin 5. Delete All 2. Network 1) Terminal ID 2) Mode [NS/SN/NO] 3) Network Type [Static IP/DHCP] 4) IP Address 5) Subnet Mask 6) Gateway 7) Server IP 8) Server port 3. Option 1. Application [Access/Time Attendance] 2. Verify Option 3.
VIRDI 4000 User Guide 4. Terminal Info Terminal ID=0001 Version=10.41.00 Application=Access Language=ENG Mode=NS Network Type= Static(1) Mac-Address=000265201111 IP Address=192.168.0.3 Gateway=192.168.0.1 Subnet Mask=255.255.255.0 Server IP=192.168.0.2 Svr-Port==2201 Card Reader=None FP-Sensor=FOS02 1:1 Level=4 1:N Level=5 Max User=0 MAX FP=0 All User=0 All Admin=0 All FP=0 1:N User=0 1:N FP=0 All Log=0 5. Ext functions 1. Lock Terminal 2. Read Card No. 6. Device 1. Set Fn-Key 2. Card Reader 3.
VIRDI 4000 User Guide 3.3. User account 3.3.1. User registration Press the [1] button in the main menu to select “1.User”, and the following screen appears: 1. Add 2. Delete 3. Modify 4. Add Admin 5. Delete All Press [1] to register a new user. User ID [NEW] ID : _ _ _ _ Enter a new user ID, and press [ENTER]. If the entered ID is not new, you will hear a “ppibig” sound and it moves to the upper menu. If not, the following authentication method selection screen appears: 1.FP 2.ID&PW 3.FP|PW 4.
VIRDI 4000 User Guide ( N=0/Y=1 ) : 1 The default is ‘1’, but it shall be set to ‘1’ to enable 1:N authentication. If there are not many users or for the convenience of a specific user, a fingerprint alone can be used for authentication, without ID. For authentication without ID, it shall be set to ‘1’. For authentication with ID, it shall be set to ‘0’. Press [ENTER] to enter fingerprints.
VIRDI 4000 User Guide If you hear a “ppiririck” buzzer sound, registration is successful. If they are different, you will hear a “ppibig” buzzer sound indicating failure and the “1.Add” menu screen appears. 3.3.1.3. “3.
VIRDI 4000 User Guide 3.3.1.6. “6. RF|FP” registration Card and fingerprint registration, and card or fingerprint authentication ◆ [ENTER] [1] [1] User ID [ENTER] [6] 1:1 Level [ENTER] Enable 1:N [ENTER] Input FP Input same FP ◆ Place the card After card registration (refer to ⑤ “5. RF” registration), fingerprint registration refer to ① “1. FP” registration.) follows. 3.3.1.7. “7.
VIRDI 4000 User Guide In this case, a card is used instead of ID for authentication. This is helpful to users who have difficulty inputting their ID. After card registration (refer to ⑤ “5. RF” registration), fingerprint registration (refer to ⑤ “1. FP” registration) follows. 3.3.1.11. “93.
VIRDI 4000 User Guide 3.3.2. Delete User ◆ [ENTER] [1] [2] User ID [ENTER] ◆ In the main menu, press [1] to select “1.User”, and the following screen appears: 1. Add 2. Delete 3. Modify 4. Add Admin 5. Delete All To select delete user, press [2]. After entering the user ID to delete, press [ENTER], and all the information about the user is deleted together with a “ppiririck” buzzer sound. However, the information is still stored in the server.
VIRDI 4000 User Guide 3.3.3.1. “1. FP” user If a user’s fingerprint is already registered, changing the identification level or additional fingerprint registration is possible. 1. 1:1 Level 2. Add FP To change the authentication level, press [1]. To add a fingerprint to the corresponding ID, press [2]. ※ A maximum of 5 fingerprints can be added to an ID. If there is an attempt to add more than 5 fingerprints, a “ppibig” buzzer sound will be heard when the user presses [2].
VIRDI 4000 User Guide < Input PW > PW:_ _ _ _ _ _ _ _ Input password. Password should be 1~8 characters in length. Press [ENTER] to input the password. PW:_ _ _ _ _ _ _ _ Input the same password once more for verification. Press [ENTER] to confirm the password. If the password change is successful, you will hear a “ppiririck” buzzer sound. If not, you will hear a “ppibig” buzzer sound and the “1. Add” menu appears. 3.3.3.3. “3.FP|PW”, “4.FP&PW” user 1. 1:1 Level 2. Add FP 3.
VIRDI 4000 User Guide 1. 1:1 Level 2. Add FP 3. Change Card Press [0] to see menus not shown in the LCD window. To cancel, press the [#] button. Press the [1] button to change the 1:1 Level (refer to “3.3.3.1”). Press the [2] button to register additional fingerprints (refer to “3.3.3.1”). Press the [3] button to change the card (refer to “3.3.3.4”). 3.3.3.6. “8.RF|PW”,”91.RF&PW”,”93.ID&PW|RF&PW” user 1. Modify PW 2. Change Card Press the [1] button to change passwords (refer to “3.3.3.2”).
VIRDI 4000 User Guide 3.3.4. Administrator registration ◆ [ENTER] [1] [4] Admin ID [ENTER] ◆ In the main menu, press [1] to select “1.User”, and select [0] to see the following screen: 1. Add 2. Delete 3. Modify 4. Add Admin 5. Delete All For administrator registration, press [4]. Admin ID [NEW] ID : _ _ _ _ Enter the administrator ID to register and press [ENTER]. ※ The procedures for administrator registration are the same as for user registration.
VIRDI 4000 User Guide 3.4. Network settings In the main menu, press [2] to select “2.Network” to see the following screen. When the setting is chosen, press [ENTER] to move to the next setting. 3.4.1. Terminal ID settings ◆ [ENTER] [2] ◆ < Terminal ID > ID : 00000001 This ID is unique for each terminal and used by an authentication server to distinguish each terminal. The default is ‘00000001’. It should be identical to the door ID set in the server program, and its length should be 1~8 characters.
VIRDI 4000 User Guide (setting ‘1’). Press [ENTER] to move to the next setting. 3.4.3. Connection method settings ◆ [ENTER] [2] [ENTER] Network Type:0 0:Static 1:DHCP [ENTER] ◆ Press [0] for Static IP. Press [1] for DHCP. The default is ‘0’ (Static IP). If a fixed IP is assigned to the unit in a network, press [0]. If there is a DHCP server in the network to which the unit is connected, press [1]. Press [ENTER] to move to the next setting. ※ For Static IP (0), refer to 3.4.4. IP address, 3.4.5.
VIRDI 4000 User Guide 3.4.6. Gateway settings 192.168. 0. 1 Press [#] to delete an old value and enter the new value. If the gateway IP address is ‘210.98.100.1’, enter as below: [2] [1] [0] [9] [8] [*] [1] [0] [0] [1] Press [ENTER] to move to the next setting. 3.4.7. Server IP settings < Server IP > 192.168. 0. 2 Press [#] to delete an old value and enter the new value. If the sever address is “210.98.100.
VIRDI 4000 User Guide 3.5. Option settings 3.5.1. Application mode settings In the main menu, press [3] to select “3. Option” and following screen appears: 1. Application 2. Verify Option 3. Set Doorlock 4. Sound Control 5. Time Setting 6. Other Setting ◆ [ENTER] To set the basic operation mode of a terminal, press [1]. [3] [1] ◆ A2pplication:0 0=Access Ctrl 1=T&A Ctrl 2=Meal Ctrl The default is ‘0’ (Access Ctrl). For simple Access control, set to ‘0’. for Time Attendance control, set to ‘1’.
VIRDI 4000 User Guide After setting , set and in the same manner. Each time shall not overlap. Ex.)start time:06:00~09:59, leave time:17:00~22:00, normal time:10:00~16:59 < Start Time > < Leave Time > < Normal Time > 06:00~09:59 17:00~22:00 10:00~16:59 After setting normal time, press [ENTER] to see the “Multi Fn-key” setting menu, which allows more than 5 working modes.
VIRDI 4000 User Guide 식수시간대로 설정되지 않은 시간에 단말은 “잠금 설정!” 메시지가 디스플 레이 되며 단말기 잠금 시와 동일하게 메뉴모드로의 진입을 제외한 모든 입력이 차단됩니다. 까지 모두 설정한 후 [ENT]키를 입력하면 아래와 같이 여부를 설정하는 메뉴가 나옵니다. 기본설정: ‘0’ (N=0/Y=1):0 중복인증제한을 하는 경우 ‘0’ 으로 설정하여 식수설정시간에 한 사용자가 한번만 인증 할수 있으며, 중복인증을 하려면 ‘F4’ 키와 함께 사용하여 인증시 가능하다. 중복인증제한을 하지 않으려면 ‘1’ 로 설정하여 인증시 제한을 주지 않는다. 설정후 [ENT]키를 입력하면 아래와 같이 를 설정하는 메뉴 가 나옵니다.
VIRDI 4000 User Guide (N=0/Y=1):0 Default setting: ‘0’ If it is set to the default setting [0], only the “Success” message is displayed. If it is set to [1], user ID is displayed in the LCD window when authentication is successful as shown below: (Ex.) OK! <0001> Press [ENTER] to move to the next setting. 3.5.2.2.
VIRDI 4000 User Guide (N=0/Y=1):0 Default setting: ‘0’ Treat first digits of the ID as a group for authentication, so 1:N authentication can be processed much faster when over 1,000 users are registered. If it is set to ‘1’, fingerprint authentication is performed for users starting with the entered ID. If it is set to ‘0’, treat entered numbers as a user ID and try user fingerprint and 1:1 authentication for the corresponding ID Ex.
VIRDI 4000 User Guide 3.5.3.1. Door opening time settings ◆ [ENTER] [3] [3] ◆ (00-30):03 Default setting: ‘03’ (unit: sec.) This is used to set the door opening time after authentication is successful. For the strike type, this means the door opening time. For the dead bolt type or auto door, this time is not effective. If this is set to ‘00’, the door is out of control, so it may be set to ‘00’ only for the start/leave time period.
VIRDI 4000 User Guide time(5sec~30sec). If so, it makes an alarm sound. If this is set to ‘00’, there is no alarm sound. This alarm helps the relevant person check what has caused the problem in a timely manner and eliminate the problem. For this function, the lock shall be able to monitor whether the door is open or closed and its monitoring pin shall be connected to the terminal. The door open check shall be set to ‘1’ or ‘2’ for this operation.
VIRDI 4000 User Guide (N=0/Y=1):1 Default setting: ‘0’ If the terminal case is damaged or opened, an alarm will sound. It works only when the case open sensor is installed. Once the setting is complete, press [ENTER] to move to the upper menu. 3.5.5. Current time settings ◆ [ENTER] [3] [5] ◆ In the main menu, press [3] to select “3. Option”. Press [5] to see the following screen:
VIRDI 4000 User Guide 40 This is for LCD backlight on/off settings. If it is set to the default setting [0], LCD backlight is normally off. Only in cases that a user operates with keypad or card, LCD backlight goes on and after the working operation is done, it goes off in about 10 seconds. If it is set to ‘1’, it always stays on. Once the setting is complete, press [ENTER] to move to the upper menu. Union Community CO., LTd.
VIRDI 4000 User Guide 3.6. Terminal information view ◆ [ENTER] [4] ◆ In the main menu, press [4] to select “4.Terminal info”, and the following screen appears, where all the environmental settings are displayed: Terminal ID=0001 Ver=10.41.00 Application =Access Language=ENG Mode=SN Press [0] to scroll up and down the screen.
VIRDI 4000 User Guide 1:N User Number of users for 1:N authentication 1:N FP Number of fingerprints for 1:N authentication All Log Authentication records stored in a terminal 3.7. Extended functions In the main menu, press [5] to select “5.Ext function”. And the following screen appears: 1. Lock Terminal 2. Read Card No. 3.7.1.
VIRDI 4000 User Guide 3.8. Device settings In the main menu, press [6] to select “6. Device”, and the following screen asking for the setting password appears: Device settings is an option that is not necessary to change after installation, so it is recommended not to change it except when it is really required. PW: This setting password is just for information, so it cannot be changed. user Enter “084265” as the setting password and press [ENTER] to view the detailed setting items. 3.8.
VIRDI 4000 User Guide This is the setting for the card reader connected to a terminal. This shall be set to ‘0’ except in the following cases: - ‘0’: no card reader - ‘1’: a low-frequency RF Card reader is installed - ‘2’: a high-frequency smart card reader is installed - ‘3’: a Wiegand-type card reader is installed (ex.: HID...
VIRDI 4000 User Guide 3.8.3.2. 1:N identification level settings ◆ [ENTER] [6] ‘084265’ [ENTER] 1:N Level (3-9):5 [3] [ENTER] ◆ Default setting: ‘5’ This sets the identification level when authentication is performed without ID input. An entered fingerprint is compared to all the fingerprints in the database for which 1:N authentication is allowed. For 1:N authentication, the identification level is not set for each user, so the terminal authentication level is basically used.
VIRDI 4000 User Guide terminal when authentication is done. It can be used only for systems where there is a lock controller and the controller is operated by a Wiegand input. This is usually set to ‘0’. - If it is set to ‘1’, user ID shall be shorter than 4 digits because “Site code [1 byte] + user ID [2 bytes]” is transferred. - If it is set to ‘2’, user ID shall be shorter than 7 digits because “Site code [1 byte] + user ID [3 bytes]” is transferred.
VIRDI 4000 User Guide This can be 2~8 digits and shall be the same as the ID registered in the server program. If the ID registered in the server program is ‘000075’, enter 6. Special care is required when reducing the number of digits during normal operation because an administrator may not be able to be authenticated when he wants to enter menus due to the reduced number of digits. Press [ENTER] to move to the next setting. 3.8.1.2.
VIRDI 4000 User Guide authentication records are not deleted. ※ If the settings are initialized, the language of the voice and menus becomes English. If you need to set other language (“6. Set Device” “1. System Config” : set to 0~4) Once initialization is done successfully, it moves to the upper menu together with a “ppiririck” buzzer sound. 3.8.6.2.
VIRDI 4000 User Guide == 00:00 == F1 00:00 == F2 00:00 == F3 00:00 == F4 00:00 Normal mode; authentication with [ENTER] F1 mode; authentication with [F1] F2 mode; authentication with [F2] F3 mode; authentication with [F3] F4 mode; authentication with [F4] - Fingerprint authentication Press the function key for authentication with the corresponding mode. If the function key is not used and authentication is done using Auto Sensing, the current authentication mode on the screen is used.
VIRDI 4000 User Guide == 00:00 == 00:00 Place your finger close to the input window when the light on the fingerprint input window turns on together with the voice message “Please enter your fingerprint”. Do not remove your finger until you hear a “ppig” buzzer sound. ▼ If authentication is successful, a success message will be displayed on the LCD together with a voice message “You are authorized”. The door relay and LED turn on. The default screen appears after 1~2 sec.
VIRDI 4000 User Guide 4.1.3. [1:N] fingerprint authentication This authentication is only allowed for a user to whom 1:N authentication is allowed during registration. ⑤ During Auto Sensing, if a user places his/her finger close to the fingerprint sensor, the light on the fingerprint input window will turn on to detect the fingerprint and the authentication result will be displayed on the LCD window.
VIRDI 4000 User Guide 4.1.4. Password authentication ⑤ If the user ID is “0001”, enter “0001” and press the function key. You will hear a “ppiriririck” buzzer sound and the terminal waits for the user password to be input. Enter the password and press [ENTER], and the authentication result appears on the LCD. == 00:00 0001 == 00:00 ****** == 00:00 If the user ID is ‘0001’, enter ‘0001’ and press the function key.
VIRDI 4000 User Guide 4.1.5. Card authentication ⑤ For a user who is registered as [RF], [RF|FP], or [RF|PW], when placing the card close to the default screen, a “ppig” buzzer sound will be heard and the authentication result appears on the LCD. == 00:00 == 00:00 If you place your card close to the unit, you will hear a “ppig” buzzer sound. ▼ If authentication is successful, you will see a success message on the LCD together with the voice message “You are authorized”.
VIRDI 4000 User Guide 4.1.6. User ID group authentication Authentication is done with the first digits (at least one digit) of the user ID instead of all the digits of the user ID. It is more convenient than 1:1 authentication. This is used when 1:N cannot be used because there are too many users or when 1:N authentication is too slow. In the menu, set as below: 3. Option settings 2.
VIRDI 4000 User Guide 4.1.7. Multiple fingerprint authentication For a door to which a higher level of security is required, multiple fingerprints from more than 2 people are assigned to a single ID. The door opens only when all the registered fingerprints are authenticated. In the menu, set as below: 3. Option setting 2.
VIRDI 4000 User Guide - Menu “3.Option” “1.Application” [1] T&A (Time Attendance) settings - If the start/leave time is fixed, set , , and to reduce user input errors. 4.2.1.
VIRDI 4000 User Guide - the same as 4.1.3. 4.2.4. Password authentication - the same as 4.1.4. 4.2.5. Card authentication - the same as 4.1.5. 4.2.6. User ID group authentication - the same as 4.1.6. 4.2.7. Working mode expansion using multi-key authentication - If more than 5 working modes such as start, leave, outside work, return, and general are required, it can be expanded up to 41 modes. - After setting Menu 3.Option 1.Application [1] T&A, in , set more than one key to ‘O’.
VIRDI 4000 User Guide 4.3. 식수관리로 사용시 - 메뉴 3. 옵션설정 1. 운용방식설정 [2]식수로 설정 - 식수관리로 설정 시 식사시간 이외의 시간에는 단말기가 잠금 상태가 되므 로 반드시 1끼 이상의 식사시간을 입력해야 합니다. - 중복인증 허용옵션을 ‘1’로 설정하게되면 중복인증 제한 없이 인증할수 있 고, ‘0’ 으로 설정하게 되면 식사 별로 각 사용자는 한번씩만 인증이 가능하 고 중복 인증이 불가하나, [ENTER]키를 사용한 중복인증 기능은 사용할 수 있습니다. - 어떠한 경우에도 중복인증을 허용하지 않기를 원한다면 중복인증 허용옵 션을 ‘0’ 으로 설정하고, 메뉴 6. 디바이스설정 1. 기능키 설정 에서 Ent=[X]로 설정합니다. 그러면 [ENTER]키를 사용한 중복인증 기능은 사용할 수 없습니다. 4.3.1.
VIRDI 4000 User Guide 카드를 입력하여 인증합니다. 4.3.2. [1:1] 지문인증 - 4.1.2. 와 동일하나 기능키에서 [ENTER]키는 사용할 수 없습니다. 4.3.3. [1:N] 지문인증 - 4.1.3. 과 동일하나 기능키에서 [ENTER]키는 사용할 수 없습니다. 4.3.4. 패스워드 인증 - 4.1.4. 와 동일하나 기능키에서 [ENTER]키는 사용할 수 없습니다. 4.3.5. 카드를 사용한 인증 - 4.1.5. 와 동일하나 기능키에서 [ENTER]키는 사용할 수 없습니다. 4.3.6. 사용자ID를 그룹으로 사용하여 인증 - 4.1.6. 과 동일 기능키에서 [ENTER]키는 사용할 수 없습니다. 4.3.7. 중복인증 허용 - 메뉴 6. 디바이스설정 1. 기능키 설정 에서 Ent=[O]로 설정되어 있어야 합니다.
VIRDI 4000 User Guide - 카드 사용자 중복 인증 시 == 123 08:34 기본화면에서 [ENTER]키를 누른 상태에서 카드를 입력합니다. ▼ == 123 08:34 == 124 08:34 인증 성공 시 성공 메시지가 출력됩니다. ▼ 기본화면으로 복귀 시 식사 횟수 증가됩니다. - 비밀번호 사용자 중복 인증 시 기본화면에서 사용자ID 입력 후 [ENTER]키를 누른 == 123 08:34 상태에서 기능키([F1], [F2], [F3], [F4]중 한 키)를 입 0001 력합니다. ▼ “삐리리릭”이 울리며 사용자의 비밀번호입력을 대 == 00:00 기하는 화면입니다. 비밀번호 입력 후 [ENTER]키 ****** 를 누릅니다. ▼ == 123 08:34 인증 성공 시 성공 메시지가 출력됩니다. ▼ == 124 08:34 기본화면으로 복귀 시 식사 횟수 증가됩니다. Union Community CO., LTd.
